nema 24 hybrid stepper motor driver

nema 24 hybrid stepper motor driver
Product Details

This nema 24 hybrid stepper motor driver is a new generation of high performance digital stepper motor driver. It adopts 32-bit DSP technology and the latest digital PID control algorithm. The embedded micro-segment control technology greatly reduces the noise and vibration during motor operation, with low noise and low vibration. Low temperature rise and so on.

The motor driver 2H606T is two phase hybrid stepper motor driver, driving nema 23 and nema 24 hybrid stepper motor driver. It has 16 microsteps, MAX micro step is 64 subdivision; Current range is 1.4A ~ 5.6A, 8 class output current, current resolution is 0.6A; with function of half current. over-voltage and over-current protection etc. It is DC power supply, working voltage is 24VDC - 50VDC, voltage shouldn't be over 50VDC, and not below 20VDC.
Parameters  :

Input Power supply :

24VDC ~50VDC

Output Current

1.4A~5.6A

Drive Way

PWM constant current chopping, three phase Sine wave output current

Suitable stepper motor

57, 60 series two phase stepper motor

Ambient environment

-10℃~55℃ 15~85%RH、No condensation. Non-corrosive, flammable, explosive,    conductive gas, liquid and dust

Keeping enviroment

-40℃~+55℃, <93%RH,No condensation, no frost

Size (L*W*H)

 118*75.5*34 mm

Net Weight

0.25 Kg

Parameters setting : 

The motor driver use eight DIP to microstep subdivision , automatic current and half /full  current , more details are as below :

 

Working current  setting (OFF=0,ON=1):

Current

SW1

SW2

SW3

1.4

0

0

0

2.1

1

0

0

2.7

0

1

0

3.2

1

1

0

3.8

0

0

1

4.3

1

0

1

4.9

0

1

1

5.6

1

1

1


Microstep  

SW5

SW6

SW7

SW8

200

0

0

0

0

400

1

0

0

0

500

0

1

0

0

800

1

1

0

0

1000

0

0

1

0

1250

1

0

1

0

1600

0

1

1

0

2000

1

1

1

0

2500

0

0

0

1

3200

1

0

0

1

4000

0

1

0

1

5000

1

1

0

1

6400

0

0

1

1

8000

1

0

1

1

10000

0

1

1

1

12800

1

1

1

1

Features:

1. The driver adopts H-bridge drive circuit, unique current control technology, low-frequency vibration and high-frequency torque.

2. It has two modes of operation: full step and half step.

3. It has two input control modes: single pulse and double pulse, and the front/rear edge of the pulse can control the motor action.

4. Its parameters can be set by the dial switch, convenient for customers to use.

5. This driver has over-current protection function and wide voltage working range, which can work under AC and DC power supply conditions respectively.

6. The internal enclosed structure of the drive is naturally cooled and suitable for various harsh working environments.

Interface of motor  driver : 
 

Note : 1.VCC is 5V  , R is short connection .
1.VCC is 12V , R is 1K , over than 1/8W resistance .
2.VCC is 24V , R is 2K , over than 1/8w resistance ,  need connect in the end of signal of controller .
Interface  connection and installing size :
 

Feedback